Key Facts
Springfield issued a voluntary safety recall on the Springfield XD-S pistol in 2013, not the XD-M. It covered specific 9mm and .45 ACP serial ranges and addressed a trigger and grip safety issue that could cause an unintended discharge or a double-fire. Owners should verify their own serial number directly with Springfield before assuming either way.
Related: Springfield XD-M Elite Compact Pistol Review: A Real-World CCW Verdict
If you searched for a Springfield XD-M trigger recall, here’s the short answer: it doesn’t exist. The documented, verified recall applies to the Springfield XD-S 3.3-inch pistol, not the XD-M and not the standard XD. That mix-up is common enough that owners regularly post the same question on Springfield’s own owner forums, unsure why their gun isn’t showing up on a recall list they’d heard about secondhand.
The confusion is understandable. Springfield’s XD family includes the standard XD, the XD-M, and the Springfield XD-S, and it’s easy to blend the names when you’re trying to figure out if your carry gun is safe. This article clears up which pistol was actually recalled, what the defect was, how to check your own serial number, and what to do if your pistol is affected.
Was the Springfield XD-S or the XD-M Recalled?
The recall applies only to the 3.3-inch XD-S, not the XD-M or the standard XD. Springfield Armory issued a voluntary safety recall in 2013 on the Springfield XD-S, in both 9mm and .45 ACP. Springfield’s own recall notice states plainly that it does not apply to any XD or XD-M pistol. If you own an XD-M, this specific recall was never about your gun. If you own a 3.3-inch Springfield XD-S purchased around 2012 or 2013, it’s worth five minutes to check your serial number.
Why Was the Springfield XD-S Recalled?
The Springfield XD-S recall addressed a defect in the trigger and grip safety. Under specific conditions, the affected pistols could experience an unintended discharge while the slide was released during loading, or a double-fire from a single trigger pull, sometimes described as a slam-fire. Springfield initiated the recall voluntarily, before any government mandate, and offered a repair to every affected owner. This is worth stating clearly: a mechanical defect that can fire a round without a deliberate trigger pull is a safety issue, not a minor inconvenience.
- Performance means more than just getting the job done
- Accurate to 1/10 of an ounce over its full weighing capacity
- Equipped with a large and easy to read digital display
Last update on 2026-07-23 / Affiliate links / Images from Amazon Product Advertising API
How Do You Know If Your Pistol Is Affected?
Locate your serial number, stamped on the frame, and check it against Springfield’s official recall records or call their customer service line directly. Serial ranges: XS900000 to XS938700 for the 9mm, and XS500000 to XS686300 for the .45 ACP. Treat those numbers as a starting point, not a final answer. Serial ranges get repeated across forums for over a decade, and the only source that matters is Springfield’s own current lookup, especially if you bought your pistol used and don’t know its full history.
What Happens During the Recall Repair?
Springfield performs the repair at no cost to the owner. Once your Springfield XD-S recall is confirmed, Springfield provides shipping instructions and repairs the trigger and grip safety mechanism free of charge, regardless of whether you’re the original buyer. Turnaround varied depending on how many pistols were in the queue at the time. Some owners reported a repair returned within weeks; others waited closer to two or three months during peak volume. Plan around the longer estimate, not the shortest one you find in a forum post, and consider a backup option if you rely on this pistol for daily carry.
Is It Safe to Carry a Springfield XD-S While You Wait?
Do not carry an unrepaired XD-S in the recall range for personal defense. If your serial number falls inside the recalled range and hasn’t been through the official repair, this isn’t a pistol to carry. One owner on Springfield’s owner forum put it plainly: “This is a safety issue, you really should send it in for the recall.” That’s the correct standard. Store the pistol safely, ship it to Springfield promptly, and use a different, verified firearm you already trust, ideally one that fits your existing IWB holster, for daily carry in the meantime.
- DIMENSIONS: 5.86 inches L x 1.72 inches W x 0.49 inches H
- ACCURATE: Measure trigger pull weight in 2 oz increments
- EASE OF USE: Simple to read sliding indicator
Last update on 2026-07-23 / Affiliate links / Images from Amazon Product Advertising API
Should You Verify or Modify the Trigger Yourself After the Fix?
This is where owners genuinely split, and both sides have a real point. Before the official repair, the only acceptable fix is the documented, manufacturer-performed one. Attempting a bench fix yourself, before Springfield’s engineering change has been applied, risks leaving the original defect partially unresolved and leaves you without any documented repair record.
After the repair comes back, the conversation changes. Many owners reported that the post-repair trigger pull felt noticeably heavier than before, in some cases moving from a smooth 5 to 5.5-pound pull up to 9 or 10 pounds. That’s a real tradeoff, a heavier pull in exchange for the corrected safety mechanism. At that point, weighing the trigger pull yourself with a gauge and function testing the reset isn’t second-guessing Springfield’s work; it’s just good ownership practice. If you decide the post-repair trigger doesn’t suit you, that’s a separate decision to make afterward, once the safety fix itself is confirmed and documented.
| Situation | What To Do |
| Serial number is in the recalled range, not yet repaired | Ship to Springfield only. No bench work. |
| Pistol just returned from the official repair | Weigh the trigger pull, test the reset, compare it to spec. |
| You don’t like the post-repair trigger feel | Address that separately, only after the safety fix is confirmed complete. |
What About the Standard XD and XD-M, Are They Ever Affected?
As of this writing, there’s no documented safety recall covering the standard XD or the XD-M. If you own either, this recall was never about you. The habit still applies: verify any future recall notice against the manufacturer’s own records instead of assuming you’re covered or clear.
Bottom Line: Verify, Don’t Guess
The XD-M trigger recall that sends people searching doesn’t exist. The real recall applies to the Springfield XD-S, and it’s a genuine, documented safety issue that Springfield addressed with a repair at no cost to owners. The mistake most owners make isn’t ignoring safety; it’s trusting a model name they half remember instead of checking their actual serial number. Five minutes on Springfield’s own lookup tool answers the question for good.
Check Your Serial Number Before You Carry Again
If you own a Springfield XD-S, stop guessing. Pull up your serial number, check it against Springfield’s current records, and if it’s affected, ship it in before it goes back into your carry rotation. Your defense plan deserves a pistol with a closed, documented safety record, not a question mark.
Check this video from Liberty Ranch‘s BIG Bullets vs MORE Bullets | Springfield XDS 45 Shooting & Review.
Frequently Asked Questions
-
Was the Springfield XD-M ever recalled?
No. Springfield’s official recall documentation for the trigger and grip safety issue explicitly states it applies only to the 3.3-inch XD-S in 9mm and .45 ACP. It does not apply to the XD-M or the standard XD line. Confusion between the model names is common, but the recall was XD-S specific.
-
What exactly was the Springfield XD-S recall about?
The recall addressed a trigger and grip safety defect on the 3.3 inch XD-S that could, in rare cases, cause an unintended discharge while loading or a double-fire from a single trigger pull. Springfield initiated it voluntarily and offered a repair at no cost to correct the mechanism.
-
Which serial numbers were covered by the XD-S recall?
Reported ranges were XS900000 through XS938700 for the 9mm and XS500000 through XS686300 for the .45 ACP. These figures come from Springfield’s original 2013 notice. Always confirm your specific serial number through Springfield’s current official lookup rather than relying on a pasted range.
-
How do I check if my XD-S is part of the recall?
Locate your pistol’s serial number, stamped on the frame, then check it against Springfield Armory’s official recall records or call their customer service line directly. Don’t rely on a forum post or an article’s serial range alone. The manufacturer’s own system is the accurate source.
-
Is it safe to carry my XD-S while I wait for the recall repair?
No. If your serial number falls in the recalled range and hasn’t been repaired, don’t carry or rely on that pistol for defense. Store it safely, ship it to Springfield promptly, and use a different verified firearm in the meantime if you need daily carry coverage.
-
How long does the Springfield recall repair take?
Owner reports from the original recall varied widely, with some repairs returned in a few weeks and others taking two to three months during peak volume. Contact Springfield directly for current turnaround estimates, since timelines depend on how many units are in their repair queue at any given time.
-
Will the recall repair change how my trigger feels?
Many owners reported a noticeably heavier trigger pull after the repair compared to their pre-recall pistol. This is a tradeoff for the corrected safety mechanism. If the new pull weight concerns you, weigh it with a gauge and compare it to Springfield’s stated specification before concluding.
-
Can I fix the recalled trigger myself instead of sending it to Springfield?
No. The recalled mechanism is a safety-critical part, and a self-performed fix isn’t documented, isn’t verified against the manufacturer’s engineering change, and could leave the original defect partially unresolved. Ship it through the official channel first, save any aftermarket trigger work for after that’s confirmed complete.
-
How much does the Springfield XD-S recall repair cost?
Nothing. Springfield covers the return shipping and the repair itself at no cost to the owner. This applies whether you’re the original buyer or purchased the pistol secondhand, since the recall is tied to the pistol’s serial number, not to who originally bought it.
-
What if I bought my Springfield XD-S used, and it falls in the recall range?
The recall follows the serial number, not the original owner. Contact Springfield directly with your pistol’s serial number, and they will issue a return authorization to you as the current owner, regardless of who purchased the pistol new or how many owners it’s had.
Make the case. Let us know in the comments below.
